Skaben 960 Self-leveling superplane filler 25 kg

Skaben self-leveling superplane filler 25 kg

This Skaben putty is especially suitable as an underlayment for parquet floors! The powder to be mixed with water results in a self-leveling and low-stress setting putty, which can withstand even the highest stress. The superplane compound is ideal for leveling mineral substrates. Thus, even on tile floors and mastic asphalt, you get exactly the foundation you need for professional parquet installation.

What Skaben's superplane filler is particularly suitable for

Do you want to install high-quality parquet on old floors? You are afraid to completely remove the existing subfloor? You are not sure if it will work and if the parquet result will make you happy later? This superplan curing filler creates a smooth underlayment that makes professional parquet installation gratifyingly uncomplicated and clean. The finished filler is easy to spread and convenient to fill to a layer thickness of 1 to 20 mm. In most cases, sanding the surface before laying the parquet is no longer necessary.

Good to know!

This filler creates standard-compliant substrates for parquet types at least 3 mm thick. With it, you prepare concrete, cement and rapid cement screed, calcium sulfate screed, mastic asphalt screed, magnesia screed, stone wood screed, ceramic tiles, natural stone coverings, terazzo, as well as screwed wood-based panels for the professional bonding of parquet floors. This filler is not suitable for floating wood-based panels, prefabricated screed and floorboards!

Important properties at a glance!

• Processing time approx. 30 minutes
• Mixing ratio: 25 kg powder with 6.0 - 6.5 l water
• Consumption: approx. 1.5 kg/m per mm layer thickness, depending on the substrate
• can be used on underfloor heating

How to use Skaben's self-leveling superplane filler!

When applying this filler, make sure that the floor and material temperature are suitable. At least 15°C floor temperature and 18°C material and room temperature are important for a good result. Now mix 6 liters of water per 25 kg of powder to produce the desired quantity. A mortar bucket, a bucket for accurately measuring the correct amount of water and a mixing paddle for the drill are important for a quick and lump-free mixing process. Use a squeegee, trowel, wide trowel and pump when applying the pumpable put ty. For 3 mm putty, you should allow a drying time of about 24 hours. For 3 mm more, you need to calculate another day. By the way, if desk chairs will be rolled back and forth on your parquet floor later, the filled surface must be at least 3 mm thick. Do you have any questions about the practical application of this putty? Give us a call! Our experts will be happy to advise you on whether this material is suitable for your project and which professional accessories will make the job easier.