Skaben 153 Eco Parquet adhesive 1K SMP 7 kg

Skaben Eco parquet adhesive parquet adhesive 1K SMP 7 kg

This high-quality parquet adhesive from Skaben makes parquet installation really fun! As you know, the finished end result can only ever be as good as the worst of all ingredients. Therefore, for a good parquet experience, it is also worth investing in the right adhesive. The extremely low-emission adhesive, which has been awarded the Blue Angel, is convincing all along the line!

For which parquet types and substrates is Skaben Öko Parquet Adhesive 1K SMP suitable?

As a hard-elastic and shrinkage-free curing parquet adhesive, this high-quality product performs the set core task professionally and environmentally friendly. This adhesive is suitable for mosaic floorboards, strip floorboards, multi-layer floorboards, solid parquet floorboards, solid floorboards from 15 mm thickness, upright lamella parquet from 16 mm thickness, bamboo and smoked oak. If you want to install surface-treated parquet on mineral substrates and wood-based materials, you are well advised to use this ecologically safe parquet adhesive. In addition, you will achieve a noticeable improvement in impact soundwith this parquet adhesive from Skaben.

Good to know

By the way, in most cases you can save an additional primer. Dirt traces of this adhesive, which is particularly popular in ecological construction, are incidentally easy to remove, so it is ideal for lacquered parquet! The high absorbency prevents the parquet from floating, which can be particularly interesting for large-format planks. At the latest 24 - 48 hours after gluing, the freshly laid parquet floor is ready for sanding and sealing.

Important properties at a glance!

• Quantity: 7 kg
• light brown color
• Certified according to EMICODE EC 1 Plus
• Application indoors
• can be used on underfloor heating

This is how the application works!

First, the adhesive must be brought to the adequate temperature. If there is a surface skin on the adhesive when you open the bucket, you should remove it and not stir it in! Apply the adhesive evenly and quickly to the substrate using a suitable toothed strip. When applying, please allow for a wall clearance of approx. 10 mm and make sure that an excessive amount of adhesive cannot later rise up through the joints. To prevent the parquet from floating, you should weigh down the parquet floorboards during the application time. All clear? If you are gluing parquet yourself for the first time, you should seek advice from a professional or read the product instructions very carefully. Our experts will be happy to help you with any questions you may have about the installation! Just give us a call!